_ _ SBR20150CT-prel SBR20150CTi-prel SBR20150CTb-prel using state-of-the-art sbr ic process technology, the following features are made possible in a single device: major ratings and characteristics characteristics values units device optimized for high temperature i f(av) 20 rectangular waveform a power supply applications v rrm 150 v i r @ 150v, tj=25 o c 12 na, typ mechanical: tj -65 to 200 (operating/storage) o c * molded plastic to-220ab, to-262, to-263 packages electrical: * ultra high thermal reliability * low reverse leakage * reliable high temperature operation * super barrier design * softest, fast switching capability * 200 o c operating junction temperature case styles SBR20150CT SBR20150CTi SBR20150CTb to-220ab to-262 to-263 ___________________________________________________________________________________________________ www.apdsemi.com 5/2/05 1 13 2 anode common cathode anode 1 3 2 anode common cathode anode 1 3 2 anode common cathode anode
_ _ SBR20150CT-prel SBR20150CTi-prel SBR20150CTb-prel maximum ratings and electrical characteristics (at 25 o c unless otherwise specified) symbol units dc blocking voltage working peak reverse voltage peak repetitive reverse voltage v rm v rwm v rrm 150 volts rms reverse voltage v r(rms) 150 volts a verage rectified forward current (rated v r -20khz square wave)-50% duty cycle i o 20 amps peak forward surge current - 1/2 60hz i fsm 180 amps peak repetitive reverse surge current (2us-2khz) i rrm 3 amps instantaneous forward voltage (per leg) i f = 10a; t j = 25 o c i f = 20a; t j = 25 o c i f = 10a; t j = 125 o c v f typ 0.82 0.94 0.67 max 0.86 0.98 0.71 volts maximum instantaneous reverse current at rated v rm t j = 25 o c t j = 125 o c i r * typ 0.012 0.09 max 5 1 ua ma maximum rate of voltage change (at rated v r ) dv/dt 10,000 v/us maximum thermal resistance jc r jc 2 o c/w operating and storage junction temperature t j -65 to +200 o c note: dice are available for customer applications. * pulse width < 300 us, duty cycle < 2% ___________________________________________________________________________________________________ www.apdsemi.com 5/2/05 2
_ _ SBR20150CT-prel SBR20150CTi-prel SBR20150CTb-prel figure 1: typical reverse current figure 2: typical forward voltage figure 3: current derating, case ___________________________________________________________________________________________________ www.apdsemi.com 5/2/05 3 apd semiconductor reserves the right to make changes without further notice to any products herein. apd semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does apd semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ?typical? parameters which may be provided in apd semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s technical experts. apd semiconductor does not convey any license under its patent rights nor the rights of others. apd semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the apd semiconductor product could create a situation where personal injury or death may occur. should buyer purchase or use apd semiconductor products for any such unintended or unauthorized application, buyer shall indemnify and hold apd semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that apd semiconductor was negligent regarding the design or manufacture of the part.. 2372-c qume drive, san jose, ca 95131, usa ph: 408 324 0918 fax: 408 955 0604 homepage: www.apdsemi.com email: info@apdsemi.com 0 2 4 6 8 10 12 100 110 120 130 140 150 160 170 180 190 200 tc, case temp (c) if, average forward current (amps) 0.000001 0.00001 0.0001 0.001 0.01 0.1 1 0 20 40 60 80 100 120 140 160 vr, reverse voltage (volts) ir, reverse current (ma) tj=25c tj=175c tj=75c t j =200c tj=125c t j =100c 0.1 1 10 100 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 vf, instantaneous typ forward voltage (volts) if, instantaneous forward current (amps) tj=125 tj=100 tj=150 tj=25c tj=75c tj=175c tj=200c
|
